Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden. Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
D5206 Possible to drain hydraulic oil completely?
Diskutiere D5206 Possible to drain hydraulic oil completely? im Forum Hydraulik im Bereich Allgemeine technische Fragen - I've drained a lot of oil when replacing the hydraulic pump. I want to replace the rest as well, but can't find any drain plug? Is there one? If...
I've drained a lot of oil when replacing the hydraulic pump. I want to replace the rest as well, but can't find any drain plug? Is there one? If so, where is it located?
Thanks!
there is no drain Plug. The easiest way to drain the oil completly is via the hydraulic coupler. Just connect an open ended hydraulic hose, put the open End into an old oil canister and open the hydraulik Valve with the motor running. As soon as air is coming out of the hose IMMEDIATLY kill the motor, otherwise you will destroy the hydraulic pump.
Thanks, I guess that will remove a lot of oil. I had to refill about 12 liters after removing the hydraulic pump, so I guess I've replaced a good part of it already. Also found a leak or two when the tractor was placed inside the garage on a clean floor. Always something.
912 oil level specifications: A long time ago I was told that a crankshaft should just splash in the oil but not be immersed in it. Oil level is certainly no casual issue but all I can...
F3l912 oil cooler leak, tightening the nut: Hello, can someone please tell me how to stop the leak at the nut that holds the oil cooler to the engine?
how tight can I turn the nut? Does anyone have a...
Loss of hydraulic pressure Kramer KL 300.: Hello everyone. I have a Kramer KL 300 and for a while it started losing pressure in the hydraulics. At first it was happening slowly.. but now it is going...
Deutz 6180 TTV intermittent transmission error code 4F: Hi,
new user on this forum from Sweden. I hope it's ok that I write in English, I read German quite ok and use google translate to Swedish when I don't...
F6L912 Injection-pump TIMING: My european model (rare in Canada) 1991 Dx-6.05 is coming along slowly. The engine is close to 'rollout' but I'm stuck with the injection drip-timing. The...